How to keep #50 from coming loose

BriteLyt and Petromax lanterns and stoves

BriteLyt

BriteLyt, Inc.
9516 Lake Dr.
New Port Richey, FL. 34654
USA
Ph: 727-856-9245
Fax: 727-856-7715

BriteLyt Multi-Fuel Lanterns, Stoves, & Petromax Lanterns
Home Of the World Famous Multi-Fuel Lantern

All you need is a small screwdriver, or other tool, & "Muffler Mender" (Registered Product)

Visit our web store for this item

BriteLyt fix for part 50 and 3 and 34 if you have a problem

Petromax BriteLyt Parts

See part #50 below and part #3 at bottom of page.

Use crescent wrench or Lantern Tool to loosen Part # 50 (see photo below)

Use a crescent wrench to remove part 50
Use tool to take out part 50
Loosen part 50 almost all the way out

Loosen part # 50 almost all the way out. Use screwdriver to judge spacing.

(see photo below)

Use screwdriver to judge spacing

Apply "Muffler Mender" onto screwdriver or tool of your choice, and apply around threads of Part # 50. (see photo below)

Muffler Mender and tool
Muffler Mender on part 50
putting muffler mender to part 50
adding muffler mender to part 50

Retighten Part # 50 and remove excess "Muffler Mender" with rag or napkin.

(see below photo) Works best if left to set for 24 hours.

Retighten Part 50

remove excess Muffler Mender with rag or napkin

Can be used on (part #3). See below.

Muffler mender for part 3

Below will be a GOOD START for optimum performance of Part #33 mixing tube.

See photo for adjustment of 33
Adjustment should start here for the 33

Britelyt, EZ-Cook , EZ-Pump,O-Ring pump system and stove are the registered trademarks and Patents # 6,439,223, # 6,688,877 and # 6,863,526 of Diana Draper.

All other trademarks are properties of their respective owners.

Web Site by Preferred Partners, LLC